| Author |
Message |
|
RoedRunner
|
Post subject: BAR length for Fake Can  Posted: Mon Oct 03, 2011 6:15 pm |
|
Joined: Mon Oct 03, 2011 6:10 pm
Posts: 5
|
|
Which length BAR Rail do I need in order for the fake can to tuck inside the rail? Or does it matter which fake can I get as well? Can someone provide me the correct combinations so get it right when I order? Might not make a difference, Carbine Length vs MidLength, but if so, please advise which is preferable. Thanks.
|
|
  |
|
 |
|
JaxChris
|
Post subject: Re: BAR length for Fake Can Posted: Mon Oct 03, 2011 6:55 pm |
|
Joined: Mon Dec 06, 2010 7:26 pm
Posts: 2873
Location: Florida
|
|
Need a 16" carbine length upper (midlength doesn't have enough barrel for the fake can), SD-1 fake can, and a minimum BAR length of 10".
Sent from my HTC Evo
|
|
| |
|
|
|
RoedRunner
|
Post subject: Re: BAR length for Fake Can Posted: Mon Oct 03, 2011 7:16 pm |
|
Joined: Mon Oct 03, 2011 6:10 pm
Posts: 5
|
|
Thanks for the reply and info.
|
|
| |
|
|
|
RoedRunner
|
Post subject: Re: BAR length for Fake Can Posted: Thu Oct 06, 2011 9:59 am |
|
Joined: Mon Oct 03, 2011 6:10 pm
Posts: 5
|
|
Will the SAR rail of 10" also allow the SD-1 fake can to tuck inside the rail? What is the difference between the SAR and the BAR? is it weight only? Or are there other things I should be aware of if I order the 10" SAR for the purpose of the fake can?
Thanks,
|
|
| |
|
|
|
loganp0916
|
Post subject: BAR length for Fake Can Posted: Thu Oct 06, 2011 10:23 am |
|
Joined: Tue Apr 19, 2011 10:15 pm
Posts: 235
Location: Florida
|
|
The SAR is thinner and I don't think any can will fit under it.
This is my SAR rail....
| Attachments: |
ImageUploadedByTapatalk1317910776.063087.jpg [ 58.91 KiB | Viewed 1433 times ]
|
|
|
| |
|
|
|
RoedRunner
|
Post subject: Re: BAR length for Fake Can Posted: Thu Oct 06, 2011 10:46 am |
|
Joined: Mon Oct 03, 2011 6:10 pm
Posts: 5
|
|
I appreciate the response and photo. Nice setup. Similar to what I am planning on building. Thanks.
|
|
| |
|
|
|
RoedRunner
|
Post subject: Re: BAR length for Fake Can Posted: Tue Oct 11, 2011 9:39 am |
|
Joined: Mon Oct 03, 2011 6:10 pm
Posts: 5
|
|
I have been doing some additional research. The website indicates the inner diameter of the SAR rail is 1.5". Also, the CAR-1 fake can diameter is 1.25" as listed in the product description, with a length of 5.5". So in essence a 12" SAR rail on a 16" carbine length upper should allow a CAR-1 fake can to tuck inside the rail? Can someone from Spike's confirm this assumption? Thanks.
|
|
| |
|
|
|
